This is typically located on the top of the shredder.
- Set the switch to reverse mode or press and hold the reverse button for 2-3 seconds allowing the machine to work the jammed paper out.
- As the shredder is reversing, gently pull the uncut portion of the paper from the machine.
- Resume shredding once the jam is cleared.
Why is there a reverse button on a shredder?
What it Does. Enabling the reverse function on a paper shredder causes the machine to back the paper out of the shredder’s cutting area, or cutter. Shredding typically occurs as you insert sheets of paper into the cutter, where paper is shredded and the remnants are disposed into a bin.
Where is the reverse button on Fellowes shredder?
The shredder should have a clearly marked “reverse” button or control switch depending on the machine. This is typically located on the top of the shredder.
Why does my shredder not work?
2 Answers. It is possible that you unit has overheated. If you have been shredding papers for a long period of time or have been inserting large amounts of paper then your device may have overheated. Turn off your device and let it cool down for 30 minutes before attempting to use it again.
How do I get my shredder unstuck?
If your shredder cannot unjam itself, you will need to do this manually.
- Unplug your shredder.
- Remove the top shredding section.
- Use a pair of tweezers to remove all jammed strands of paper from the blades.
- Cut all curled pieces of paper.
- If plastic is causing the jam, use a screwdriver to clear the block.
Why does my paper shredder stop working in the middle of shredding?
Paper shredder stops working in the middle of a shredding session. Blinking indicators that informs you about the paper jam. The shredder only works in reverse. To fix a paper jam there are several things you can do but remember to NEVER put your fingers near the blades or feed opening.
Do you have a shredder that won’t shred?
Do you have a shredder that won’t shred? Many people don’t realize that most paper shredders have a maximum run-time because their motor gets warm from shredding. The maximum run time means that if a shredder is used for a long time consecutively, the machine will eventually shut off to cool down.
What to do if your paper shredder is jammed?
Shredder Jammed First Unplug The Shredder, Open Door/Remove Bin And Look At The Output Side Of The Blades. If There Is Blocked Paper Manually Pick/Pull The Paper Out. Where Possible Liberally Apply Some Shredder Oil Between The Jammed Pages, Run In Reverse & Forward Consecutively Until Paper Is Released
Why does my Fellowes w11c Shredder only work in reverse?
My Fellowes W11C shredder only works in reverse! Can I fix it? I think my son must have been playing with the switch. Anyway, it is in standby mode when on, but doesn’t do anything when you try to feed it. Switch it to reverse, it runs no problem.
