Do not proceed to Primer Filler stage until filled area is even. Adding body filler AFTER primer filler should be avoided to prevent possible adhesion, staining and shrinkage concerns.
Can you add filler over primer?
To answer your question, yes you can put filler over primer as long as you sand it first with 180 or courser grit paper.
Does body filler go on bare metal or primer?
The short answer is filler companies suggest it needs to go on bare metal, and epoxy companies suggest you put filler over epoxy so they can sell more of their product.
Can you use body filler over self etching primer?
As long as you let the primer fully cure and then scuff the surface it will be fine. As a matter of FACT body filler works better when applied over a protective primer (epoxy or self etching) simply because the primer helps protect the bare steel from moisture.
Can you paint over body filler?
Fillers and putties will normally work OK over properly sanded (80-180 grit) cured OEM paint. However, with so many different types of aftermarket paint available (lacquer, enamel, urethane, water-based). We recommend that all paint be removed where filler is to be applied.”
Can I put body filler over paint?
Can they be applied over paint? A. Evercoat fillers are designed to work over bare, properly prepared substrates such as: steel, aluminum, galvanized metal, fiberglass, and SMC. Fillers and putties will normally work OK over properly sanded (80-180 grit) cured OEM paint.
What primer do I use over body filler?
Urethane primer (2K) Urethane primer is the most common primer used in auto body and restoration by far. It has good solids and fills well. It is easy to sand and can provide you with a perfect body when blocked properly. Care should be taken when applying it as to not use too much.
What primer goes over body filler?
For small repairs, you can bog directly over the bare metal. If the repair is larger, or you’re looking for a longer-lasting job, apply a base coat of epoxy primer before laying on the filler.
Is primer and filler the same?
Filler primers are basically formulated to fill in any pits in the surface from sanding or rust even quicker than an epoxy primer alone. Some restorers believe filler primer is little more than liquid body filler. In most cases, the filler primer or high-build primer is also a urethane product.
Can you paint straight over body filler?
You should never paint directly over body filler, for one, paint does’nt stick to it forever and also the filler sucks up the paint and it is harder to cover, adventualy you may have some problems if you just shoot directly over filler, I’ve gotten away with it on a large area that was primered then watersanded and a …
Can you apply body filler over 2K primer?
Yes. You CAN apply over sanded 2k primer, or bare metal. Be sure to have the area sanded with at least a 150 so the filler has some TOOTH to grab to. Click to see full answer. In respect to this, can body filler be applied over epoxy primer?
What’s the difference between autobody filler and primer?
Autobody filler is (basically) made of a vinyl ester or a polyester type resin. Epoxy primer is (basically) made of an epoxy type resin.
Should you apply body filler directly over metal or epoxy?
Should YOU Apply Body Filler Directly Over Metal or Epoxy Primer? Learn how to paint and customize projects from your own home garage without a spray booth! Thanks for watching this keynote presentation entitled Should YOU Apply Body Filler Directly Over Metal or Epoxy Primer?
Which is better epoxy filler or primer?
Autobody filler is (basically) made of a vinyl ester or a polyester type resin. Epoxy primer is (basically) made of an epoxy type resin. If you were to bond/glass over a metal pad to a fiberglass boat, vinyl ester or polyester is never used, epoxy is.
