SAE to Metric Conversion Chart
| SAE | Metric | Inch |
|---|---|---|
| 9/16″ | 0.563 | |
| 15mm | 0.591 | |
| 19/32″ | 0.594 | |
| 5/8″ | 0.625 |
What size bolt takes a 15/16 wrench?
Hex Bolt, Lag Bolt, Square Bolt and Heavy Hex Bolt
| US Bolts | ||
|---|---|---|
| Bolt Diameter (in) | Head and Wrench Size (in) | |
| 9/16 | 13/16 | |
| 5/8 | 15/16 | 1 1/16 |
| 3/4 | 1 1/8 | 1 1/4 |
What thread is a 15mm nut?
The threads on compression fittings are usually 1/2″ BSP and 3/4″ BSP (for the 15mm and 22mm fittings).
What size bolt does a 14mm wrench fit?
Metric / Standard Wrench Conversion Chart
| Bolt Diameter | Metric | Standard |
|---|---|---|
| 1/4″ | 11mm | 7/16″ |
| 5/16″ | 13mm | 1/2″ |
| 3/8″ | 14mm | 9/16″ |
| 7/16″ | 16mm | 5/8″ |
What size nut fits a 5/16 bolt?
US Nut Size Table
| Size | Diameter* | |
|---|---|---|
| Hex Nut | Machine Screw Nut | |
| 5/16″ | 1/2″ | 9/16″ |
| 3/8″ | 9/16″ | 5/8″ |
| 7/16″ | 11/16″ | – |
What size Bolt uses a 12mm wrench?
The nut takes a 13mm spanner, (which suggests M8), the length of the whole thing is approx….What size bolt fits a 12mm socket?
| Bolt size | Size | Tolerance |
|---|---|---|
| 12mm | 12.30 | |
| 5/16″UNF | 1/2″ | 13.00 |
| M8 | 13mm | 13.30 |
| 1/4″BSW | 13.64 |
What size is a M8 nut?
M8 Hexagon Nuts (DIN 934) – Marine Stainless Steel (A4) Technical Specification
| Finish | Natural |
|---|---|
| Nut Width A/F (J) | 13mm |
| Nut Width A/P (P) | 14.38mm |
| Thread Pitch | 1.25mm |
| Thread Size | M8 (8mm) |
How big is a bolt head and Wrench?
Metric Bolt Head/Wrench Size Bolt Diameter (mm) Head/Wrench Size (mm) Head/Wrench Size (mm) Head/Wrench Size (mm) Head/Wrench Size (mm) 8 13 13 12 – 10 16 17 14 – 12 18 19 17 22/21* 14 21 22 19 –
How big is a 10 mm metric wrench?
SAE & Metric Wrench Conversions SAE Wrench Size Bolt Size (SI) Metric Wrench Size 5/16″ 1/8″ 8 mm 3/8″ 3/16″ 10 mm 7/16″ 1/4″ 11 mm 1/2″ 5/16″ 13 mm
What kind of wrench do I need for a 15mm socket?
The standard wrenches needed are: 11,13,15,17,19,22,24,27,30,32,36mm. I believe that the bold that goes with the 15mm wrench is normally an M8. M8s usually use 12 or 13mm heads.
Can a metric wrench be converted to a SAE wrench?
If you encounter this, your may need to experience with all four potential wrench sizes. Chances are that there will be two eligible wrench sizes that you can use (1 SAE & 1 MM). If you’re looking to find the right wrench for a metric bolt, the conversion is very much the same.
